[RE-wrenches] myers hubs

[Nick Vida]

yes you need a myers hub for the same above the bottom 1/3 and into the top for your non-metalic enclousure. some will use a water tight connector (raintight with a gasket ring). Either way you need a bonding bushing on your connector or a myers hub with the bonding screw on the inside locknut to bond together all the conduits coming into the enclosure.
i would suggest a hole saw definitely if you are working with fiberglass combiner box and also for a pvc box because a unibit makes a cloud you dont want around you in fiberglass and makes a beveled hole in a pvc box that can make a seal difficult if your not careful.

nick



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090724/1033bcf3/attachment-0003.html>