[RE-wrenches] Small Torque Wrench

[robert ellison]

I got mine from "the knife and tool store"
http://myworld.ebay.com/don19470/on E bay. nice tool, adjustable 10 -
50 In Oz and he has others, just get
the adapter that lets you use 1/4" drive bits and your good to go. It is a
german tool and i use it on all breaker connections as well as others.

Later,
Bob

On Mon, Mar 9, 2009 at 12:10 PM, Peter Parrish <
peter.parrish at calsolareng.com> wrote:

>  We have a great torque wrench for snugging down module clamps, Sharp SRS
> bolts, etc. What do folks use to insure that wire terminals are torqued to
> spec? We’re talking 1.1 to 3.3 N-m (10-30 in-lbs). I’m imagining something
> compact like an over-sized screwdriver.
>
>
>
> - Peter
>
> Peter T. Parrish, President
> California Solar Engineering, Inc.
> 820 Cynthia Ave., Los Angeles, CA 90065
> Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
> CA Lic. 854779, NABCEP Cert. 031806-26
> peter.parrish at calsolareng.com
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090309/48ea1e1d/attachment-0003.html>