[RE-wrenches] Recommendations for 10kW wind turbine

[Chris Daum]

Hi Larry:
 
Check with Logan Bryce of Pine Ridge Products; he's been a beta-tester for
several manufactures for quote a while.  Here's his information:
 
Pine Ridge Products, Logan & Jenni Bryce, PO Box 2334, Great Falls, MT
59403, 406-738-4284  wlbryce at pineridgeproducts.com
 
I know he's installed several of Bergey's Excel 10, and thinks pretty highly
of them.
 
All the best,
 
Chris Daum
Oasis Montana Inc.

  _____  

From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Starlight
Solar
Sent: Wednesday, March 04, 2009 3:13 PM
To: RE-wrenches
Subject: [RE-wrenches] Recommendations for 10kW wind turbine


Hello Wrenches,

I have a customer from Saskatchewan that is wintering in Yuma that wants to
take a 10kW+/- grid tie wind turbine back home this spring. His average
annual wind speed is 6.9 m/s. He will arrange for the tower and
installation. It looks like there are many wind turbine companies cropping
up so I would like some advice and/or recommendations from the air wrenches
on the board.

Kindest Regards,

Larry Crutcher
Starlight Solar
(928) 941-1660
Renewable Energy Products, Service and Installation

Mailing Address (NO SHIPPING):
11881 S Fortuna Rd.
#210
Yuma, AZ 85367

Shipping and retail store (NO MAIL):
2998 Shari Ave 
Yuma, AZ 85365

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090304/03320ea3/attachment-0003.html>