[RE-wrenches] Cad to PDF problem II
North Texas Renewable Energy Inc
ntrei at earthlink.net
Sat Feb 7 16:26:34 PST 2009
Or the simple solution, turn it into a polyline and increase its width.
Jim
----- Original Message -----
From: William Miller
To: RE-wrenches
Sent: Saturday, February 07, 2009 4:12 PM
Subject: [RE-wrenches] Cad to PDF problem
Friends:
I am having problems printing CAD drawings to a pdf. My lines are very thin and faint. Has anyone else experienced this? Got any ideas???
Thanks in advance.
William Miller
PS: Adobe Pro has a hairline fix tool -- does the job but adds a step. Looking for something automatic.
Wm
Please note new e-mail address and domain:
William Miller
Miller Solar
Voice :805-438-5600 Fax: 805-438-4607
email: william at millersolar.com
http://millersolar.com
License No. C-10-773985
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090207/d95fcee3/attachment-0003.html>
More information about the RE-wrenches
mailing list