[RE-wrenches] dpw top of pole mount pipe problems
Wind-sun.com
windsun at wind-sun.com
Mon Feb 2 09:11:31 PST 2009
A few years ago I saw a similar installation where the clamping bolts on the mount itself shattered the (very brittle) cast iron pipe that had been used at the top.
Be afraid.. be very afraid...
..................................................................................................
Northern Arizona Wind & Sun - Electricity From The Sun
Solar Discussion Forum: http://www.wind-sun.com/ForumVB/
..................................................................................................
----- Original Message -----
From: ryan at solar4maine.com
To: re-wrenches at lists.re-wrenches.org
Sent: Monday, February 02, 2009 9:40 AM
Subject: [RE-wrenches] dpw top of pole mount pipe problems
Wrenches i have a customer that wanted to install a dpw top of pole mount for 18 sharp 180 watt panels. he installed his own pipe and even after several reminders by me and a signed contract stating shcedule 80 8 inch steel pipe he installed a 8 inch cast iron water main.
My dilemma is this he claims to wave my liability in this install but he has been a very high maintnence customer and seems to forget everything we talk about or he signs. so would you go ahead with the install or is the cast iron going to shear off and the rack fall over?
financially i have met my obligations with the customer i can wave the labor cost and tell him to find someone else at this point if need be i dont want to be liable for spilling 18 panels on the ground and my insurance wouldnt cover it as we went against dpw's recomendations
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090202/ff9b0926/attachment-0003.html>
More information about the RE-wrenches
mailing list