[RE-wrenches] Aluminum Lay-In Lugs
benn kilburn
bennkilburn at hotmail.com
Thu Dec 3 08:19:37 PST 2009
Wrenches,
I have heard conflicting information regarding the use of aluminum lay-in lugs for bonding module frames and racking. Would anyone care to comment on the use of aluminum, copper or tin plated lugs. Which ones are best? For what reason should a particular type be avoided? (eg. dissimilar metal, galvanic corrosion).
Cheers,benn
DayStar Renewable Energy Inc. benn at daystarsolar.ca780-906-7807
HAVE A SUNNY DAY
CONFIDENTIALITY NOTICE: This email, including any attachments, contains information from DayStar Renewable Energy Inc. and/or its affiliates, which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this email in error, please notify the sender immediately by "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
_________________________________________________________________
Ready. Set. Get a great deal on Windows 7. See fantastic deals on Windows 7 now
http://go.microsoft.com/?linkid=9691818
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20091203/dd40a65c/attachment-0002.html>
More information about the RE-wrenches
mailing list