[RE-wrenches] battery box fan
jay peltz
jay at asis.com
Fri Nov 7 15:55:14 PST 2008
Hi Larry,
I suggest you get a 12v fan, make it easy.
jay
peltz power
On Nov 7, 2008, at 1:29 PM, Larry Brown wrote:
> Wrenches.
>
> On an upgrade to an existing system, we just installed a Xantrex
> XW6048 inverter. We have a 48 volt dc battery box vent fan that we
> used to run through the relay on the old SW5548. The XW6048 has a
> 12 vdc aux output so I assume we need to install a relay to run the
> fan, 12vdc input, that will allow 48 vdc output
> Any suggestions on what relay to use?
>
> Thanks
>
> Larry Brown
> Sun Mountain
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list