[RE-wrenches] mate/flexnet

[jay peltz]

Hi Phil,

OK thanks,

jay

peltz power
On Nov 6, 2008, at 7:37 AM, Phil Undercuffler wrote:

> Unfortunately, no.  I have a single FX in my home system, and when I
> wanted to add the FN-DC I had to add a Hub & Mate too.  The inverter  
> (or
> charge controller) provides power to the hub, and the hub sends the  
> info
> to the Mate.
>
> Phil Undercuffler
> Director, Battery-based and Off-grid
> Distribution Sales Group
> Conergy
> Our World Is Full of Energy
> 1730 Camino Carlos Rey Suite 103
> Santa Fe, NM  87507
> p.undercuffler at conergy.us
> Direct | 505.216.3841
> Toll Free | 888.396.6611 x4841
> Fax | 505.473.3830
> www.conergy.us
>
> -----Original Message-----
> From: re-wrenches-bounces at lists.re-wrenches.org
> [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay
> peltz
> Sent: Thursday, November 06, 2008 8:15 AM
> To: RE-wrenches
> Subject: [RE-wrenches] mate/flexnet
>
> HI All,
>
> Can you run the mate just with the flexnet,and  no inverters, CC or  
> hub?
>
> thanks,
>
> jay
>
> peltz power
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>