[RE-wrenches] mate/flexnet
Phil Undercuffler
P.Undercuffler at conergy.us
Thu Nov 6 07:37:49 PST 2008
Unfortunately, no. I have a single FX in my home system, and when I
wanted to add the FN-DC I had to add a Hub & Mate too. The inverter (or
charge controller) provides power to the hub, and the hub sends the info
to the Mate.
Phil Undercuffler
Director, Battery-based and Off-grid
Distribution Sales Group
Conergy
Our World Is Full of Energy
1730 Camino Carlos Rey Suite 103
Santa Fe, NM 87507
p.undercuffler at conergy.us
Direct | 505.216.3841
Toll Free | 888.396.6611 x4841
Fax | 505.473.3830
www.conergy.us
-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay
peltz
Sent: Thursday, November 06, 2008 8:15 AM
To: RE-wrenches
Subject: [RE-wrenches] mate/flexnet
HI All,
Can you run the mate just with the flexnet,and no inverters, CC or hub?
thanks,
jay
peltz power
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
More information about the RE-wrenches
mailing list