[RE-wrenches] Vanner - BP inverter
Tom Elliot
telliot at wagonmaker.com
Sat Sep 27 12:35:22 PDT 2008
Yes it was, and you're right, it is a simple mercury switch, no mppt or
anything else. I rather liked the DC circuits buil into the panel since it
allowed for controlling individual DC circuits. We had two in our house and
thus had separate breakers for our DC well pump and DC pressure pump. But
again that was with the basic Infinity 6 panel, which is the left side of
the unit you have.
Tom
----- Original Message -----
From: "Drake Chamberlin" <drake.chamberlin at redwoodalliance.org>
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
Sent: Saturday, September 27, 2008 11:22 AM
Subject: Re: [RE-wrenches] Vanner - BP inverter
Thank you Tom. I don't know if it is the same or not. It seems like
it must be related. Do you know if the charge control was
theoretically rated at 60 amps?
Drake
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.7.3/1694 - Release Date: 9/26/2008
6:55 PM
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: multipart/alternative
Size: 1 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20080927/f7f95103/attachment-0007.bin>
-------------- next part --------------
No virus found in this outgoing message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.7.3/1694 - Release Date: 9/26/2008 6:55 PM
More information about the RE-wrenches
mailing list