[RE-wrenches] evergreen panels diode problems
Bill Brooks
billbrooks7 at yahoo.com
Thu Sep 18 17:59:46 PDT 2008
Jay,
I believe Evergreen has had a variety of diode problems over the past year
or so. Not unlike several other manufacturers. Beware of inexpensive
off-shore modules. It is common for new manufacturers to underestimate the
design concerns with diodes. It's been going on for about 30 years.
Bill.
-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Thursday, September 18, 2008 5:24 PM
To: RE-wrenches
Subject: [RE-wrenches] evergreen panels diode problems
Hi All,
I"ve got two evergreen 170 watt panels with bad bypass diodes in them.
In service for under 2 months.
Only odd thing is that this is a positive ground system.
They are running at 3 in series for a 48v system.
Anybody else have problems with them?
thanks
jay
peltz power
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
More information about the RE-wrenches
mailing list