[RE-wrenches] SUPER STRUT

[Darryl Thayer]

Many people including DPW have told me that there is no problem except in coastal regions with galvanizing in touch with Aluminium.  My experiance has agreed with this.
Darryl


--- On Sun, 9/14/08, Dana <dana at solarwork.com> wrote:

> From: Dana <dana at solarwork.com>
> Subject: [RE-wrenches] SUPER STRUT
> To: "'RE-wrenches'" <re-wrenches at lists.re-wrenches.org>
> Date: Sunday, September 14, 2008, 4:35 PM
> The Gold and Silver coatings are better - Super strut and ??
> 
>  
> 
> Thanks -
> 
>  
> 
> Dana Orzel
> 
>  
> 
> Great Solar Works, Inc
> 
> www.solarwork.com
> 
> E - dana at solarwork.com
> 
> V - 970.626.5253
> 
> F - 970.626.4140
> 
> C - 970.209.4076
> 
>  
> 
> From: re-wrenches-bounces at lists.re-wrenches.org
> [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
> Behalf Of Andrew
> Truitt
> Sent: Sunday, September 14, 2008 1:54 PM
> To: RE-wrenches
> Subject: [RE-wrenches] Unistrut
> 
>  
> 
>    2 quick questions regarding the building of a unistrut
> sub-frame:
> 
>    1) Do you agree that the "Green-galv" is the
> most corrosion resistant
>    unistrut finish?
> 
>    and
> 
>    2) Should I use a thin piece of EPDM membrane between
> the aluminum L-feet
>    and the strut to prevent galvanic erosion over the long
> term?
> 
> 
>    Many thanks,
> 
>    Drew
>    
> 
> -- 
> "Don't get me wrong: I love nuclear energy!
> It's just that I prefer fusion
> to fission. And it just so happens that there's an
> enormous fusion reactor
> safely banked a few million miles from us. It delivers more
> than we could
> ever use in just about 8 minutes. And it's
> wireless!"
> 
> ~William McDonough
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org