[RE-wrenches] Enphase inverters

Christopher Freitas cfreitas at outbackpower.com
Wed Aug 20 08:04:59 PDT 2008


Bill - 


Are you saying that we can now eliminate the DC disconnects from systems now as long as the PV module connectors require a tool to open and are marked "Do Not Disconnect Under Load" or "Not for Current Interrupting."


Do the PV module connectors need to be readibly accessible?  Or can they be located behind the PV modules? 


Would this require a roof top mounted AC disconnect withing sight of the inverter/modules?  


Christopher


------------------------------------
Christopher Freitas
Director of Research and Development
OutBack Power Systems, Inc. 

cfreitas at outbackpower.com
Tel  360 435 6030
cell 360 202 4239



 



EMAIL CONFIDENTIALITY NOTICE:
The preceding message (including attachments) is covered by the Electronic Communication 
Privacy Act, 18 U.S.C. sections 2510-2521, is confidential, and may also be protected by
attorney-client or other privilege. If you believe that it has been sent to you in error,
please do not read it. If you are not the intended recipient,you are hereby notified 
that any retention, dissemination, distribution, or copying of this communication is
strictly prohibited.  Please reply to the sender that you have received the message in 
error, then delete it. Thank you.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 4112 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20080820/f6231b1e/attachment-0007.bin>


More information about the RE-wrenches mailing list