XW inverters [RE-wrenches]

[Matt Tritt]

<x-flowed>

Jeff,

Yes, you can replace OB boards in the field, but if you do, the 
certification is voided! I have heard this from several sources, and it 
would be good for Christopher to comment on this.

Matt T

Jeff Yago wrote:

>I attended an XW training program last fall in Long Beach and thought this new inverter had some great design features over others we have been installing.  I recently purchased several XW inverters including all options for stock but as yet have not found an application.   However, I have heard a few comments here and from others who have installed XW systems and have described a few "bugs" they had to deal with.  Since most of these related to software problems, I assume they are easy to correct, but I do not know if these are being addressed at this time, are going to be addressed, or updated software is already available for us to download into inverters already purchased.
>
>Having replaced boards in Outback inveters with little trouble, I was concerned to hear that Xantrex is not allowing board replacement in the field and hope someone on this list can address these concerns,
>
>Thanks,
>
>Jeff Yago 
>
>
>
>_____________________________________________________________
>Netscape.  Just the Net You Need.
>
>
>- - - -
>Hosted by Home Power magazine
>
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Moderator: michael.welch at homepower.com
>
>
>No virus found in this incoming message.
>Checked by AVG - http://www.avg.com 
>Version: 8.0.138 / Virus Database: 270.4.7/1544 - Release Date: 7/10/2008 7:37 AM
>
>
>
>  
>


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------

</x-flowed>