XW6048 running a 1HP pump? [RE-wrenches]
Travis Creswell
tcreswell at ozarkenergyservices.com
Thu Jun 12 06:55:44 PDT 2008
>From memory, measuring with a Fluke 336 my 1hp 3-wire pump surges to ~33
amps and runs at ~11 amps.
Travis Creswell
Ozark Energy Services
-----Original Message-----
From: Chris Daum [mailto:info at oasismontana.com]
Sent: Sunday, June 08, 2008 4:46 PM
To: RE-wrenches at topica.com
Subject: RE: XW6048 running a 1HP pump? [RE-wrenches]
Sub pump. I'm figuring a surge around 9600 - 10000W at 240 VAC. Does that
ring true?
Chris Daum
Oasis Montana Inc.
406-777-4309 local line
-----Original Message-----
From: daryl_solar at yahoo.com [mailto:daryl_solar at yahoo.com]
Sent: Sunday, June 08, 2008 12:08 PM
To: RE-wrenches at topica.com
Subject: Re: XW6048 running a 1HP pump? [RE-wrenches]
Hi Chris
Is this a submersible or surface pump?
I have started and run a 1 hp blower on an XW6048, but this is not a pump,
which I believe can have a much larger starting surge. I have also run a
speed drive and larger motor, again not the same. If I get a chance I will
start a pump, but I do not know what the HP is. Wish I could help,
BTW where can person get 24 v cfls
Darryl
--- On Sun, 6/8/08, Chris Daum <info at oasismontana.com> wrote:
> From: Chris Daum <info at oasismontana.com>
> Subject: XW6048 running a 1HP pump? [RE-wrenches]
> To: RE-wrenches at topica.com
> Date: Sunday, June 8, 2008, 11:24 AM
> Dear Folks:
>
> Is anyone using the XW6048 to run a 240VAC 1HP pump motor?
> Seems to me like
> the surge on that is borderline effective....
>
> Chris Daum
> Oasis Montana Inc.
> 406-777-4309
> 406-777-0830 fax
> www.oasismontana.com
>
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.0.0/1489 - Release Date: 6/7/2008
11:17 AM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.3.0/1499 - Release Date: 6/12/2008
7:13 AM
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list