Unisolar Laminates [RE-wrenches]

David Buckner dbuckner at solaresystems.com
Fri Apr 25 20:07:05 PDT 2008


They have a list of approved commercial roofing applications and we used one of them, so I assume we're ok.  I have been in touch with a Unisolar rep throughout the process and all seems in order.
David




-----Original Message-----
From: Rob Harlan <mendosol at mcn.org>
Sent: Friday, April 25, 2008 8:00 PM
To: RE-wrenches at topica.com <RE-wrenches at topica.com>
Subject: Re: Unisolar Laminates [RE-wrenches]



David,
Are you foregoing the warranty in this installation or does UniSolar have a
new policy on warrantable substrates?
Rob Harlan
Solar Energy Society of Canada
Northern Alberta Chapter



On 4/25/08 3:48 PM, "David Buckner" <dbuckner at solaresystems.com> wrote:

> 
> 
> We have recently installed a 10kW Unisolar peel and stick to a
> commercial roofing company's epdm roof as sort of a test run.  It seems
> to have gone well, but we haven't even commissioned it yet so I have no
> real feel for how it will perform.  We are now looking at a larger
> project on another roof and I'm just feeling a little cautious about it.
> Can any of the veterans out there who have installed Unisolar laminates
> over the years weigh in how they are performing and holding up in
> general?  Anyone can feel free to scrutinize the code compliancy of the
> commercial flat roof peel and stick if you have two cents to throw in.
> Fire Dept. issues? Etc.
> 
>  
> 
> Thanks for any advice received.
> 
>  
> 
>  
> 
> --
> David Buckner
> 
> President
> 
> 
> Solar Energy Systems, LLC.
> 
> 1205 Manhattan Avenue
> Suite 1210
> Brooklyn, NY 11222-1058
> 
> ph 718-389-1545 (ext 11)
> fx  718-389-2820
> e  dbuckner at solaresystems.com <mailto:dbuckner at solaresystems.com>
> 
>  
> 
>  
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> - - - -
> Hosted by Home Power magazine
> 
> To send a message: RE-wrenches at topica.com
> 
> Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
> 
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
> 
> Check out participant bios: www.mrsharkey.com/wrenches/
> 
> Moderator: michael.welch at homepower.com
> 
> 


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------







More information about the RE-wrenches mailing list