Unisolar Laminates [RE-wrenches]

[Randy Brooks]

<x-flowed>


David,

Our oldest install of Uni-Solar PVL modules is also 7 years old and  
no problems.  Of the half dozen systems of PVLs we've installed there  
has only been one module failure (the only one I've ever heard of) -  
a PVL-124 on a system four years old failed (very low voltage).  Uni- 
Solar is replacing it under warranty.  This also resulted in us  
learning about the removal procedure, which I had not heard of before  
despite being a certified installer.  :)

Overall, good performance from all systems.

take care,

Randy Brooks
Brooks Solar, Inc.
Solar Power for People
140 Columbia View
Chelan, WA  98816
509-682-9646
info at BrooksSolar.com
www.BrooksSolar.com

On Apr 25, 2008, at 2:48 PM, David Buckner wrote:

>
>
> We have recently installed a 10kW Unisolar peel and stick to a
> commercial roofing company's epdm roof as sort of a test run.  It  
> seems
> to have gone well, but we haven't even commissioned it yet so I  
> have no
> real feel for how it will perform.  We are now looking at a larger
> project on another roof and I'm just feeling a little cautious  
> about it.
> Can any of the veterans out there who have installed Unisolar  
> laminates
> over the years weigh in how they are performing and holding up in
> general?  Anyone can feel free to scrutinize the code compliancy of  
> the
> commercial flat roof peel and stick if you have two cents to throw in.
> Fire Dept. issues? Etc.
>
>
>
> Thanks for any advice received.
>
>
>
>
>
> --
> David Buckner
>
> President
>
>
> Solar Energy Systems, LLC.
>
> 1205 Manhattan Avenue
> Suite 1210
> Brooklyn, NY 11222-1058
>
> ph 718-389-1545 (ext 11)
> fx  718-389-2820
> e  dbuckner at solaresystems.com <mailto:dbuckner at solaresystems.com>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://lists.topica.com/lists/RE- 
> wrenches/read
>
> List rules & how to change your email address: www.mrsharkey.com/ 
> wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>


--
[Non-text portions of this message have been removed]


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


</x-flowed>