Slate Roof Attachment? [RE-wrenches]

[Ron Stephan]

David,
The Conergy SunTop rack is designed for all kind of fragile roof
decking, slate is just one it.

http://www.conergy.us/PortalData/3/Resources/products/photovoltaics/pdf/
suntop_im_usa_0705.pdf

Take a look at the bottom of page ten to see the slate roof hook.


Ron Stephan
Solar Energy Systems, LLC
1205 Manhattan Avenue
Suite 1210
Brooklyn, NY 11222

www.solarEsystems.com

ph. 718.389.1545 ext. 13
fx. 718.389.2820

-----Original Message-----
From: August Goers [mailto:august at luminalt.com] 
Sent: Thursday, February 07, 2008 5:07 PM
To: RE-wrenches at topica.com
Subject: RE: Slate Roof Attachment? [RE-wrenches]


David,

Slate isn't much fun. We had a slate roofer train us which really
helped.
Natural slate has contours and thin and thick spots. If you step on a
weak
spot you'll crack the slate. After a bit of practice you'll learn where
to
walk. It is best to have a roofer on site or on call to help repair any
slate which cracks during the install. Certain cracks can be repaired
with
glue, others require full replacement. 

I believe that Quickmounts might be compatible with slate:
http://www.quickrackpv.com/ but I've never used them for slate
specifically.
That's what I'd try for my next slate project. You would just have to
drill
one hole through the slate.

When we installed on slate a roofer worked with us to flash and seal our
posts. The result was great but it took quite a while because you have
to
remove the slate around each standoff and then cut and replace. The
roofer
also installed toe boards (aka roof scaffolding) for us because it was
so
steep.

Depending on the size of the job and the cost of labor in your neck of
the
woods I'd add at least $1 per AC watt.

-August 

-----Original Message-----
From: David Brearley [mailto:david at meridiansolar.com] 
Sent: Thursday, February 07, 2008 1:32 PM
To: RE-wrenches at topica.com
Subject: Slate Roof Attachment? [RE-wrenches]



Is anyone out there doing installations on slate roofs?  If so, what is
your
preferred attachment and racking detail?  Also, what is the cost premium
per
watt?

 

Thanks in advance, 

 

David

 

 

Meridian Energy Systems, Inc. (TECL: 24461)

2300 S. Lamar Blvd., Ste. 107

Austin, Texas 78704

P: 512-448-0055

F: 512-448-0045

 <mailto:david at meridiansolar.com> david at meridiansolar.com

 <blocked::http://www.meridiansolar.com/> www.meridiansolar.com

 

 


[Non-text portions of this message have been removed]


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------