metering 1-phase inverter in 3-phase service? [RE-wrenches]
Darryl Thayer
daryl_solar at yahoo.com
Wed Jan 16 12:19:15 PST 2008
I believe a 240v meter will work, as the meter
measures the voltage and the current and does the
multiplication. My experiance with a 4 jaw meter in
the past worked just fine. If you have a Neutral
current, which you should not have, (you should not
even have a neutral connection) it might put the
reading off. But you should not have a neutral
connection. If you have a neutral connection, then you
need a 5 jaw meter, (this is the type we use in
appartment buildings where we have 120/208 3 phase and
deliver to each unit 120/208 uning only 2 legs of the
3-phase.
Darryl
--- Nicholas Ponzio <nponzio at buildingenergyus.com>
wrote:
> Wrenches,
>
> We're installing a Sunny Boy 5000US in a commercial
> building with
> 3-phase 208 (L1, L2, L3, N). The output of the SB
> will only be
> 1-phase, 208 (L1, L2, N). How do I meter this? Will
> a standard 240V
> kwh meter be accurate in this application or do I
> need a 3-phase
> meter?
>
> Thanks in advance for any input.
> -Nik
>
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list