placment of inverter breaker [RE-wrenches]
Todd Cory, Mt. Shasta Energy Services
toddcory at finestplanet.com
Wed Jan 16 06:34:28 PST 2008
<x-flowed>
Then there is the issue of those GE meter mains with the feed in the
center of the buss.
Todd
Mark Frye wrote:
>Further,
>
>I suppose there may be some good in this new section as it allows 120% on
>all systems, residetial and commercial.
>
>But, I would hate to have to face the situation where a fairly large breaker
>already exists at the opposite most position on the buss, and now I HAVE to
>move it because the PV breaker (total of all breakers greater than 100%)HAS
>to go in that slot, and there ain't no spare conductor on the exisiting
>breaker.
>
>MPF
>
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list