placment of inverter breaker [RE-wrenches]

[Mark Frye]

Further,

I suppose there may be some good in this new section as it allows 120% on
all systems, residetial and commercial.

But, I would hate to have to face the situation where a fairly large breaker
already exists at the opposite most position on the buss, and now I HAVE to
move it because the PV breaker (total of all breakers greater than 100%)HAS
to go in that slot, and there ain't no spare conductor on the exisiting
breaker.

MPF


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------