[RE-wrenches] voltage drop
William Miller
wrmiller at charter.net
Tue Dec 9 22:48:45 PST 2008
Dear Wind & Sun:
What "standard" are you referring to? We are using the 75C values from the
NEC in order to assure code compliance. We need to have a direct link to
the NEC in case of compliance or liability issues.
Thanks for asking.
William Miller
At 09:34 PM 12/9/2008, you wrote:
>I looked at the resistance values you have in that spreadsheet. Do you
>have some kind of "fudge factor" built into it for temperature?
>
>The values in the spreadsheet seem to be the NEC values for 75C. For
>example, #10 your sheet shows 1.24 ohms/1000 feet, whereas the "standard"
>at 25C is around.998 to 1.014 ohms.
>
>..................................................................................................
>Northern Arizona Wind & Sun - Electricity From The Sun
>..................................................................................................
>
>----- Original Message ----- From: "William Miller" <wrmiller at charter.net>
>To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
>Sent: Tuesday, December 09, 2008 1:27 PM
>Subject: Re: [RE-wrenches] voltage drop
>
>
>>Colleagues:
>>
>>We have a voltage drop spread sheet on our web site. Excuse any
>>immodesty, but we feel it is superior to any others we have seen for
>>several reasons, including the spreadsheet allows you to judge a range of
>>wire sizes in one glance and you are not limited to standard voltage
>>(120, 240, etc) like other charts. I have recently updated the sheet I
>>use to also account for temperature and conduit fill. The newest version
>>is on the web yet, but I will get it there in the next few days. IN the
>>meantime, the tried and true tool is at:
>>http://mpandc.com/resources/resources.html It is about the fourth item down.
>>
>>I have heard from many installers and designers that they use the sheet
>>and no one has complained of any inaccuracies. But, as always, you are
>>responsible for verifying your results.
>>
>>Good luck,
>>
>>William Miller
>>
>>
>>_______________________________________________
>>List sponsored by Home Power magazine
>>
>>List Address: RE-wrenches at lists.re-wrenches.org
>>
>>Options & settings:
>>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>>List-Archive:
>>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>>List rules & etiquette:
>>www.re-wrenches.org/etiquette.htm
>>
>>Check out participant bios:
>>www.members.re-wrenches.org
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list