wind controller [RE-wrenches]
Jon Haeme
jjhaeme at stelle.net
Sun May 11 15:01:29 PDT 2008
The Outback FlexMax 80 can be used with the ARE110 and a voltage
limiter. Kestrel also uses the Outback MX-60 with a voltage limiter.
Wind turbines can reach excessively high voltages and some manufacturers
have started using voltage limiters to allow for longer wire runs on
battery charging units by upping the voltage to 200 volts from the
turbine then limit it to 130 V before the MPPT controller.
I would like to see Xantrex make an 80 amp MPPT controller that could be
used with a voltage limiter on a wind turbine. It would be nice combined
with solar PV, the XW6048 inverter and the Xanbus network. All the input
info on one control panel !
Jon Haeme
jay peltz wrote:
>
> Hi Bob,
>
> I believe the new "classic" from midnite advertises both.
>
> jay
>
> peltz power
> On May 11, 2008, at 12:32 PM, Bob Ellison wrote:
>
> > I just had a customer call me saying he was told at a show that
> > someone had a functioning controller that would do wind or solar.
> > Anyone heard of anything up and running yet?
> > I know several are in the works, anyone got there yet?
> > He actually seemed surprised I didn't have one.
> >
> > Thanks,
> > Bob
>
Jon Haeme
NABCEP certified PV installer
Kempton, IL
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list