AEE Dump Load Element for Water Heaters [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Mon Mar 31 17:59:41 PDT 2008
<x-flowed>
Hi Travis,
I don't use those anymore but stick with AC units.
I use standard AC units, and run them off the AC side.
They come in lots of sizes.
jay
On Mar 31, 2008, at 10:03 AM, Travis Creswell wrote:
>
> Hello All,
>
> I'm trying to replace standard screw-in water heater elements with
> elements
> supplied by AEE. This is for a wind turbine dump load. The AEE
> elements do
> not have any sort of shoulder or washer head on them which I think is
> imperative to a obtaining a proper seal.
>
>
> Every standard water heater element relies on this shoulder to
> force the
> rubber washer into a groove on the water heater for a water tight
> seal. The
> water heater fitting along with the old and new elements are straight
> threads which is standard for water heater elements. I'm no
> plumber but
> I've changed out my fair share of elements over the years and I see no
> possible way to make the AEE elements seal properly over the long
> run. I
> suppose I could get enough Teflon tape and pipe dope on there to
> seal but I
> sure wouldn't trust it for very long.
>
> What am I missing?
>
> Thanks in advance,
> Travis Creswell
> Ozark Energy Services
>
>
> No virus found in this outgoing message.
> Checked by AVG.
> Version: 7.5.519 / Virus Database: 269.22.1/1352 - Release Date:
> 3/31/2008
> 10:13 AM
>
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://lists.topica.com/lists/RE-
> wrenches/read
>
> List rules & how to change your email address: www.mrsharkey.com/
> wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list