s!5 Clamps [RE-wrenches]
Blair May
tump at hughes.net
Wed Mar 26 15:42:33 PDT 2008
So n using the s5 clips how does 1 locate the clips? I would be very interested in what the manu says re/ distance of spacing the clips if 1 has the opportunity to suggest stitch/layout of the pan securing clips. One roofer suggested 6" spacing! That would, if one were to come in after the roof went down, make it tough to NOT pinch a clamp. - have always found the lack of documentation severely lacking re/ S5 clips!
Sent via BlackBerry by AT&T
-----Original Message-----
From: Aaron Wellendorf <Aaron at stellarenergy.com>
Date: Wed, 26 Mar 2008 11:36:54
To:RE-wrenches at topica.com
Subject: RE: s!5 Clamps [RE-wrenches]
TUMP,
Sorry for the confusion. I'm not talking about lags or fastening through
the metal pan itself. The S5 clamps onto the standing seam, but just not
directly on top of (pinching) the location of the roofing clip that
secures the metal pan to the purlin or the wood deck. I have called my
roofer and Dynamic Fasteners (S5 distributor) this morning to verify
that this is the correct. Dynamic Fasteners is working on providing me
documentation.
By the way: my roofer said he has installed S5s directly pinching the
roof clips on his own house 3 years ago. However, he used two roof clips
at each location to fasten to the wood deck. The S5 clamp was installed
directly over only one of the clips. He admitted his mistake in doing
this, but said he has not noticed a problem so far. However, he can't
see if there is a problem because it is all covered up by the roof
metal. Also, the pans on his house are short.
Aaron
-----Original Message-----
From: Blair May [mailto:tump at hughes.net]
Sent: Wednesday, March 26, 2008 10:22 AM
To: RE-wrenches at topica.com
Subject: RE: s!5 Clamps [RE-wrenches]
I guess I'm missing something here..... just how does one attach the s 5
clip if it is designed to clamp the standing seam of the roof panel?
"Therefore, place the S5 clamps within a couple inches of the roof clips
but not directly over them."
Why would I want to use these? Seems like your saying lag thru the panel
kinda like what is done to a shingled roof? Please clarify! Thanks, TUMP
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list