Endurance wind [RE-wrenches]

[Jay Peltz, Peltz Power]

<x-flowed>

HI Christopher,

So can we interface this machine with the FX?

I often have long distance issues for wind turbine placement, that  
might be perfect for a machine such as this?

thanks,

jay

peltz power
On Feb 21, 2008, at 12:57 PM, Christopher Freitas --- OutBack Power  
wrote:

>
> Here is the website for the Endurance Wind turbine manufacturer.
>
> http://www.endurancewindpower.com/
>
> Seems like they are just finishing beta test and getting ready for
> production.
>
> It's a AC output machine - induction AC generator - no inverter -  
> which
> usually gives poor performance at low wind speeds as the AC  
> generator's
> power factor and performance is usually heavily dependant on being  
> able
> to achieve reasonable RPMs. They do switch the output to 120VAC at low
> power and then to 240VAC at higher power - which is a interesting
> trick...
>
> The do advise using tall towers at least!  Also no mention of roof
> mounting either... So the sniff test says they are OK...
>
> These should also be possible to use in AC coupled off-grid
> applications.
>
> Christopher
>
>
>


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------

</x-flowed>