Solar Carports [RE-wrenches]
Chris Meier
chrism at unirac.com
Thu Feb 21 07:26:11 PST 2008
There has been a movement towards carport designs. The Google
project was a custom engineered system using railings to limit the
amount of steel required. The easiest way to do them at this point is to
work with your racking provider and a steel carport manufacture or
designer to take advantage of both worlds. The racking can greatly
reduce install time and the amount of steel needed and the carport
manufacture normally has some turn key solutions for the substructure.
Chris Meier
Product Manager
UniRac, Inc.
1411 Broadway Blvd. NE
Albuquerque, NM 87102-1545
Ph: 505-242-6411
Fx: 505-242-6412
Email: chrism at unirac.com
Web: http://www.unirac.com
-----Original Message-----
From: Ezra Auerbach, DragonSun Consulting [mailto:ezra at lasqueti.net]
Sent: Sunday, February 17, 2008 8:58 AM
To: RE-wrenches at topica.com
Subject: Re: Solar Carports [RE-wrenches]
Better yet, there are companies who will install the carports ready
for your crew to show up and install the solar. Google "pre-
fabricated car ports" and you'll be off to a fine start.
Cheers,
Ezra
Ezra Auerbach
DragonSun Consulting
Lasqueti Island, B.C. V0R 2J0
ezra at lincsat.com
250 333 8650
On 16-Feb-08, at 8:18 PM, Mick Abraham wrote:
>
> Peter Parrish wrote:
>
> "We have never done a carport, neither retrofit nor new construction.
> Are their companies out there that sell standard or custom kits
> that can
> be purchased and installed by solar contractors?"
>
> Mick says: Try www.envisionsolar.com I can't tell if they would sell
> just the support structures, or if they only want to do the entire
> project.
>
> Be sure to report back on the List so we'll know the answer to that.
>
> Mick Abraham, Proprietor
>
> www.abrahamsolar.com
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://lists.topica.com/lists/RE-
> wrenches/read
>
> List rules & how to change your email address: www.mrsharkey.com/
> wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
--
[Non-text portions of this message have been removed]
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list