Module wiring safety [RE-wrenches]
Steve Johnson
stevejohnson at comcast.net
Thu Jan 24 08:25:27 PST 2008
Most every house has 240 AC disconnects at kid level that can be fairly
easily opened and has exposed live metal inside. This hasn't been a
problem and it is everywhere.
Michael Welch wrote:
>
> Hi Ray. Here is an idea that I have not heard yet. What makes AC cords
> in a household safe from kids yanking on them? The fact that the plugs
> slip out of sockets, leaving no exposed live terminals or wires.
>
> Instead of requiring that module cables be locked into place, make the
> leads so that if they are forced out with xx lbs. of pressure, there
> will be no exposed live terminals or wires.
>
> Ray Walters wrote at 12:28 AM 1/22/2008:
>
> >Oh Boy,
> >We're actually cooking up a virtual arsenal of ideas to tackle this
> >problem:
> >
> >1) Bill's idea that ground mounts get the back of the modules blocked
> >or caged off. (Cattle panel to the back rails would do it?)
> >
> >2) Taller Pole mounts , but we're still bumping around just how
> >high. How bout a chart that puts min. height based on array voltage.
> >12/ 24 v goes on regular pole, 48 v goes higher, etc. At 240, we're
> >at 10 ft?
> >
> >3) William's covers. (they're sounding better all the time)
> >
> >4) glue on j-boxes with liq. tite conduit.
> > a) cut connectors, splice in jboxes.
> > b) keep MC connects and cover with liq tite conduit.
> >
> >5) Political pressure on the Panel manufacturers to help us.
> >
> >6) Someone on the list (Outback, AEE, Conergy ?) could re-brand a
> >module and then modify it slightly by adding a j-box (at an
> >additional cost of course). Or just make it an allowable wiring
> >method that won't void the warranty.
> >
> >Miss any body's ideas?
> >
> >Ray
>
>
Steve Johnson
LightWave Solar Electric
Nashville, Tennessee
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list