DC relay for 48V Power Vent [RE-wrenches]
John Raynes
john at raynes.com
Tue Feb 19 13:15:06 PST 2008
<x-flowed>
I'm sure this has been covered some time in the past, but with the Topica
search function being kaput...
Does anyone have a part number for a relay for switching a 48V Power Vent
from an MX60 aux output, one that has worked well for them? I know I could
have ordered the 12V model, and powered it directly, but I didn't. I
assume the relay I need is going to have a 100V-125VDC rating, since no one
to my knowledge makes a relay with 70-80 volt ratings. That usually means
mercury-wetted or solid state for DC relays. Without getting too exotic or
pricey I thought someone may know of a model that works well and mounts to
a relay socket or DIN rail.
Thanks,
John Raynes
RE Solar
Torrey, UT
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list