Hidden Low profile conduit through roof - flashing? [RE-wrenches]

[Peter Parrish]

I would just add that an "SLB" - the short version of the LB - is an even
better fit. Because it is smaller, pulling wire can be a bit more work.

- Peter

Peter T. Parrish, Ph.D., President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
CA Lic. 854779, NABCEP Cert. 031806-26
peter.parrish at calsolareng.com 

-----Original Message-----
From: Kirpal Khalsa [mailto:solarworks at gmail.com] 
Sent: Thursday, December 06, 2007 3:56 PM
To: RE-wrenches at topica.com
Subject: [Norton AntiSpam] Re: Hidden Low profile conduit through roof -
flashing? [RE-wrenches]

Troy....you can use an LB that goes down into the roof and attaches to
your conduit in the roof....the LB should be able fin under the panels
and the rack.....
Cheers.....
Kirpal
Renewable Energy Systems

On 12/6/07, troy <taharvey at heliocentric.org> wrote:
>
> I need to pull 3/4" conduit through a roof so it is aesthetically
> hidden beneath the array. Standard  electrical roof flashing have a
> 1.5" riser, too big and too tall.
>
> What is the favored method for flashing a small conduit penetrating
> the roof, so its profile fits below the rack & panels?
>
>
> Troy Harvey
> ---------------------
> Heliocentric
> 801-453-9434
> taharvey at heliocentric.org
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
>
>


-- 
Sunny Regards,
Kirpal Khalsa


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------