Flex ware inverter bypass slide [RE-wrenches]

[Mark Frye]

Indeed, but the questions arise, is this star washer specifically 
documented in the installation literature?  Is there ever a time when 
the enclosure maybe in operation when the inverter is not installed?

Just look around at most every listed appliance with a door, especially 
motor control centers, power distribution equipment, computer server 
racks, etc. and you will see the door bonding strap. I haven't taken a 
look at a Satcon or SMA 100kw inverter lately but I bet I would see them 
there.

It seems pretty much an "industry" standard.  Sure it's tough for the 
small guy to meet every requirement, and no one could start into 
business if they did, but that doesn't make the standard go away.

boB Gudgel wrote:
> 
> 

> I would use a screw with star washer to make sure the inverter is 
> connected electrically to the door, or backplate or whatever it is 
> mounted to.... Not just E-Panels.
> 
> boB


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------