greentag meters on a XW 240 output grid tie [RE-wrenches]
Todd Cory, Mt. Shasta Energy Services
toddcory at finestplanet.com
Mon Nov 12 15:47:11 PST 2007
<x-flowed>
I think your assessment is correct. After doing this on my home system
this summer, I learned way more about form 12s meters than I ever wanted
to. It is not very "elegant" but you will need separate meters on each
120 volt leg just like on the outback.
Todd
Kirpal Khalsa wrote:
>Greetings.....has anyone out there thought through the process of
>connecting greentag meters to the xantrex XW units if outputing
>240VAC.....I am thinking you would need to connect 2 of the greentag
>meters - 1meter to each 120 leg to monitor the amount of energy the
>charger is using to keep the batteries charged.... so that value of
>energy could be deducted from the grentag totals.....This is what we
>have done when connecting 2 outback GVFX's to the grid.....each
>inverter and therefore each leg had to have a seperate bi-directional
>120VAC meter with 5th jaw kit connected to properly monitor
>"greentagable" credits.
>advice, wisdom?
>Many thanks.
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list