Generwreck auto start [RE-wrenches]

Drake Chamberlin Drake.Chamberlin at redwoodalliance.org
Sat Oct 27 10:36:08 PDT 2007


Larry,  

How do you keep the starter battery charged?

Drake 
 
> What I have done for off grid use is to cut 1 wire going to the AUTO 
> side of the switch (a DPDT), install a 12 volt relay n/o contacts in 
> series with that wire, then leave the switch in AUTO. When the Outback 
> calls for generator, the relay closes and the generator takes over like 
> you put it in AUTO. This solution leaves the MAN and OFF position  for 
> local control. It has worked for me on many Generacs. Of course, this 
> will not work with line voltage present.
> 
> 
> 
> Larry Crutcher
> Starlight Solar
> Yuma, AZ
> Renewable Energy Products Powered by STARLIGHT


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------




More information about the RE-wrenches mailing list