system expansion [RE-wrenches]

[Don Loweberg]

In a message dated 8/21/2007 10:21:44 AM Pacific Daylight Time, 
jberdner at sma-america.com writes:

Basically we were discussing the fact that if the breakers for the PV
were installed at the bottom of the panel (farthest from the main lugs)
you can not create an over current situation anywhere on the bus.
The current from the grid flows down from the top and the PV current up
from the bottom

 
 
Something to this effect is proposed for the 2008 code? As I recall.
 
Don



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour

[Non-text portions of this message have been removed]


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------