Grounding Methods [RE-wrenches]

[Bob Ellison]

<x-flowed>
Actually the "grease" or antiox goop might be a good idea to prevent
corrosion between the stainless clips and the aluminum racking in the
long run.
Just a thought,
Bob


On 6/13/07, Don Loweberg <I2P at aol.com> wrote:
>
>
>
> In a message dated 6/12/2007 10:15:44 AM Pacific Daylight Time,
> august at luminalt.com writes:
>
> The clips drastically reduce install time and cost because we can complete
> the entire racking ground system before placing the modules. It also reduces
> the amount of tin coated copper lugs used.
>
>
>
> Thanks August,
>
> Did your local insist on the grease or just recommend?
>
> Thanks to all who have contributed some very good input on this grounding
> method.
>
> Don Loweburg
>
>
>
> ************************************** See what's free at http://www.aol.com.
>
> [Non-text portions of this message have been removed]
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
>
</x-flowed>