Acceptance of Module Grounding Clips [RE-wrenches]

[William Miller]

<x-flowed>

Bill / Wrenches:

Bottom up installations (those where the modules are mounted on a rack 
which is tilted up and allows access from the back for wiring) do allow one 
to disconnect and test current carrying leads and connection points without 
breaking the ground.  These racks are typical with ground mounted arrays 
and some factory built racks.  We use tilt up racks in 99% of our installs.

William Miller


At 11:12 AM 5/23/2007, you wrote:

>I have
> > seen many situations where the back-connected ground wire had to be
> > removed before it was possible to get to the wiring. Until there is a plug


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


</x-flowed>