Outback inverter actual ratings [RE-wrenches]
Todd Cory, Mt. Shasta Energy Services
toddcory at finestplanet.com
Wed May 2 16:36:35 PDT 2007
<x-flowed>
I have heard the "valve cover" was designed for the original, non-vented
FX inverters.
You are correct, the cover not only restricts air flow but actually
causes the air intake fan to suck up some of the warm air exiting the
inverter vents... so not the best design for optimal cooling. I removed
mine and it dropped the "temp counts" significantly.
Todd
Wallace Stahle wrote:
>----- Original Message -----
>From: "Christopher Freitas --- OutBack Power" <cfreitas at outbackpower.com>
>
>
>
>>There are numerous reasons you might be seeing lower performance - here
>>are some of them:
>>
>>
> The DCC
>
>
>>"valve cover" is not the best design - which is why replaced that
>>mechanical designer.
>>
>>
>
>
>Would it not be more useful to replace the cover design? It seems the best
>designs come from those who have learned from their mistakes. I know, I've
>made a few.
>
>Regarding that cover, I have an installion upgade utilizing an existing
>cabinet that is 14"
>deep. There is plenty of space above and below as well as good airflow into
>and out of
>the cabinet. As is, I would have 2.13 " clear from cover to inside of door.
>The PSMP reduces that by .75"
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list