Ground mount racks [RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

<x-flowed>

In snow country it is essential to get the modules up off the ground. I 
typically use pole mounts high enough so the bottom row of modules is at 
least 4' off the ground. It is no fun shoveling snow from arrays mounted 
to close to the ground.

Todd


Andrew Truitt wrote:

> I have only seen the adjustable tilt racks on off grid systems.
> However, we did just install a  couple of DP&W pole mounts with a
> grid-tie system and they are very easy to adjust, increasing the
> customer's production by about 10%.  DP&W also provides instructions
> on how to pour their foundations that I am confidant will satisfy the
> inspector.
>
> Cheers,
>
> Andrew Truitt 


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------




</x-flowed>