AC Connection at Fused Disconnect [RE-wrenches]

[William Miller]

<x-flowed>



No.




At 07:17 AM 2/4/2007, you wrote:

>I am planning to go apply for a permit from the City of Berkeley and expect
>to get denied.
>
>The job is this:
>
>The house has a combination meter base with two main breakers only. There is
>plenty of room to install a tap on one of the feeders before it leaves the
>enclosure.
>
>I want to install a branch circuit for the PV by mounting a fused disconnect
>next to the meter base (<10 ft), tap one of the feeders and running the
>circuit wire to the top of the fused disconnect.
>
>The AC of the single UL1741 inverter will be connected to the bottom of the
>fused disconnect.
>
>I believe that such a method is clearly allowed by the Code.
>
>Is anyone aware of any reasonable interpretation of any Article of the Code
>that would support the AHJ's determination that the method is not allowed?
>
>Thanks,
>
>Mark Frye
>Berkeley Solar Electric Systems


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>