NEC 600V limit and a Low Temp Bypass [RE-wrenches]

[troy]

<x-flowed>

Is there any reason an array which would otherwise go above the 600V,  
but uses a low temperature panel bypass to keep it below 600V under  
all circumstances not meet the NEC?


Troy Harvey
---------------------
Heliocentric
801-453-9434
taharvey at heliocentric.org


On Nov 15, 2007, at 10:31 AM, Don Loweburg wrote:

>
>
>
> In a message dated 11/15/2007 8:40:36 A.M. Pacific Standard Time,
> joel.davidson at sbcglobal.net writes:
>
> People  who are not
> NABCEP certified, or a licensed contractor or engineer or a  degreed
> practitioner should not be denied the opportunity to do the  work.
>
>
>
>
>
> Joel,-- If they can cut the mustard. Also no one is denied anything.  
> If an
> individual wants to do their own thing-no problem. If they want to be
> professional and charge money , that's another thing. That is they  
> are subject  to
> local jurisdiction.  And both Bob-O and Ezra made it clear what the   
> board policy
> is.
>
> Don Loweburg
>
>
>
> ************************************** See what's new at http://www.aol.com
>
> [Non-text portions of this message have been removed]
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
>


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>