Equalizing battery charger [RE-wrenches]

[Drake Chamberlin]

<x-flowed>

Hi Jay,

This is good news.  If I understand right, I plug the charger into 
the AC, and adjust the pot with the DC disconnected?  Is that it?

Thank you,

Drake

At 02:13 PM 12/23/2007, you wrote:
>HI Drake,
>
>I've never seen the iota go to the 14.8 with the RJ11 pluged in.
>
>If you look on the end with the fan, you should see a small 1/4"
>round sticker.  If you peal this back you will find a small pot that
>you can adjust up to around 15.5v depending on the exact model. ( to
>adjust disconnect the DC load turn it on and adjust it, pretty easy.


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------




</x-flowed>