208 V 2 pole meter [RE-wrenches]
Darryl Thayer
daryl_solar at yahoo.com
Tue Dec 11 14:26:02 PST 2007
I am surprized if he is correct. The meters work on
120 to 240 volt just fine, your power is single phase
added to a three phase load, your meter is single
phase, I think it will work. Perhaps you can get
intouch with the meter people.
Darryl
--- Steve Johnson <stevejohnson at comcast.net> wrote:
>
> I have installed a SB 400US in a system with a PV
> production meter. The
> main meter is a 208v, 3 phase CT. The PV production
> meter is on the
> load side of the main meter. From the inverter it
> goes through an AC
> disconnect, through a 2 pole feed through meter
> base, and onto a 2 pole
> breaker in the main panel.
>
> The utility meter guy says his 2 pole 240 v
> single(split) phase meter
> won't read the 208v 2 pole output of the Sunny Boy
> correctly because it
> has a 240 volt coil in it. Says they don't make a 2
> pole 208 volt
> meter.
>
> Is this right? What to do? I guess I could change
> the meter out to a 3
> phase 208v meter base and they could put in a feed
> through 3 phase
> meter, there just wouldn't be any power on the third
> leg.
>
> Anybody else run into this?
>
> Steve
>
> Steve Johnson
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios:
> www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
>
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list