Hidden Low profile conduit through roof - flashing? [RE-wrenches]
Mark Frye
markf at berkeleysolar.com
Fri Dec 7 11:23:25 PST 2007
Now that I am done being petulant, and can go forward and say that I
have used the Soladeck with good results:
http://www.rstcenterprises.com/
Look for the new solar product.
I build two type of comp shingle roof mount systems.
One involves building up a pipe rack to carry the module rails. I build
it with about 9 inches clearance above the deck for good access and
cooling. I call it the beast. With this I can easily stub up the
conduit, install a standard metal cone flashing, and cut under the
modules with an SLB.
I have also been installing the Sharp SRS system which is low profile.
However there is enough clearance under the modules to fit the Soladeck.
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list