Flex ware inverter bypass slide [RE-wrenches]

[Christopher Freitas --- OutBack Power]

jay peltz wrote:

> Whats funny is that Midnite solars box's work perfectly,

Perfectly Huh?  I strongly disagree - the Midnite AC bypass is not safe 
or compliant with the UL standards for a System Bypass or the NEC code 
because: 

The AC bypass bypass slider plate does not allow you to set both circuit 
breakers to the OFF position.  

It also does not allow the handle of the circuit breaker to indicate 
that it has tripped due to the extremely small opening for the handle in 
the AC bypass slider plate.   

The AC bypass slider plate also covers up the labeling on the breaker as 
to the amperage and on/ off status.  

I think these are serious safety issues with the Midnite product.  

Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com  
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030  


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------