Gunite on modules [RE-wrenches]

[Jay Peltz, Peltz Power]

<x-flowed>

Photos, ray photos!!

jay
On Jun 15, 2007, at 6:07 PM, Ray Walters wrote:

>
>
> I've dealt with concrete plaster on modules before. THe clock is  
> ticking my friends; the longer it sits the harder it gets. I've  
> gotten it off with soapy water, rags and scrapers within the first  
> couple of days.
>
> I saw a 300Kw system practically ruined by idiots overspraying  
> epoxy paint onto plastic lensed modules. That did not come off with  
> soap and water.
>
> Ray
>
>
> On Jun 14, 2007, at 9:34 PM, Jeff Oldham wrote:
>
>>
>>
>> I think the acid that is suggested should be Muriatic not  
>> Hydrochloric. I've always used Muriatic. I sure would expect some  
>> frame etching though. I like the soaked rag idea - good one! I  
>> would try to use a putty knife or razor blade to scrape off as  
>> much as possible before dropping acid. But the best of all is to  
>> get the culprits to deal with it!
>>
>> Good luck,
>> -jeff
>>
>>
>>> From the Solar, Wind and Hydro powered office of Jeff Oldham/ 
>>> Regenerative SOLutions
>>
>>
>> _____________________________________________________________
>> Click here to find the right stock, bonds, and mutual funds.
>> http://track.juno.com/s/lc?u=http://tagline.untd.us/fc/ 
>> CAaCX09nslLfFWwvFKWareHPWM2ccpCi/
>>
>> [Non-text portions of this message have been removed]
>>
>>
>> - - - -
>> Hosted by Home Power magazine
>>
>> To send a message: RE-wrenches at topica.com
>>
>> Archive of previous messages: http://lists.topica.com/lists/RE- 
>> wrenches/read
>>
>> List rules & how to change your email address: www.mrsharkey.com/ 
>> wrenches/etiquette.php
>>
>> Check out participant bios: www.mrsharkey.com/wrenches/
>>
>> Moderator: michael.welch at homepower.com
>>
>>
>
> R. Walters
> Solarray.com
> NABCEP # 04170442	
>
>
>
>
> --
> [Non-text portions of this message have been removed]
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://lists.topica.com/lists/RE- 
> wrenches/read
>
> List rules & how to change your email address: www.mrsharkey.com/ 
> wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


</x-flowed>