Optimizing OutBack GridTie [RE-wrenches]

[Chris Worcester]

I am setting up our first grid tie OB GVFX3524 with PV; approx 500 watts of
1973 Solarex modules on a Zomeworks tracker, using an MX60. We did add the
Hub4 and a Mate 2.
Our client had an SW4024 from '94 running the house we removed. 
He wants the OB to be set up to use the grid as little as possible and have
this setting be automated. 
What combination of settings will accomplish this? Thanks in advance for any
and all comments, suggestions, etc.


Sincerely,

Chris Worcester 
NABCEP Certified PV Installer TM 
USA Distributor of Proven Wind Turbines
Toll Free: 877-682-4503
Fax: 530-582-4603
www.solarwindworks.com
chris at solarwindworks.com
"Proven Energy Solutions"


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------