MX 60 Max Amps [RE-wrenches]

[David Palumbo, Independent Power & Light]

Question on MX performance with the following off-grid 24v battery system.

(8) Sanyo 195w HIP-BA3's (all in parallel) 68v Voc (55vpMax) input voltage
to MX 60. Cold climate installation (-40 F winter lows, 95 F summer highs).
1,560 watt array. MX 60 manual says the MX60 can handle 1,600 watts. It also
says the Output Current Rating is 60 amps "continuous" @ 25C ambient.

My question is. Will the REV 7 MX 60's put out greater than 60 amps for
short periods of time?

Dave


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------