208 3 phase net meter w CT's [RE-wrenches]
Steve Johnson
stevejohnson at comcast.net
Wed Apr 11 10:23:32 PDT 2007
I'm having problems with our local utility with a 208V 3 phase, net
meter. TVA has a "generation meter" to measure the PV which has to be
on the load side of the main meter. The local utility changed their main
meter out to a digital net meter so it would be bi-directional. This
main meter is connected to CT's above it at the 600 amp overhead riser.
Problem is the meter is recording way,way low. They have "programmed"
it twice and seem to be baffled. Anybody else had this experience with
wiring a 208 3 phase net meter into CT's? The PV Generation Meter is
working fine. (Customer gets 15 to 20 cents credit on the PV generation
meter).
Steve Johnson
LightWave Solar Electric
Nashville, Tennessee
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list