PSR used as raceway/enclosure [RE-wrenches]

[Bill Hoffer]

My inspector is calling me because I used the upper section of my PSR 
battery cabinet to run my PV source circuit, battery circuit, and my ac 
circuits.  I believe that the wires are permitted in the same 
UL1741-2000 listed enclosure  if the wire insulation ratings are equal 
to or greater thanthe maximum circuit voltage applied to any conductor 
within the enclosure (NEC 300-3).  there is an exception (NEC 690-4 (b)) 
for PV input and output circuits, but still allowed if seperated with a 
partition or are connected together.  Does wire ties meet this 
requirement?.  I will need to make a second penetration into a stucco 
strawbale wall to make the inspector happy...seems rather extreme.  Any 
experience with this situation out there?  Thanks! 


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------