5000W/ 48V water heater dump load element [RE-wrenches]
Hugh Piggott
hugh at scoraigwind.co.uk
Sat Dec 23 13:52:06 PST 2006
<x-flowed>
>HI Hugh,
>
>Do you like the Tristar external relay package?
>thanks and happy holiday
>
>jay
Hi Jay,
No, I have not tried that yet. Of course you don't need it for a
thermostat transfer. And I use analog circuits for the simple
voltage switching jobs.
You could switch a heater based on battery voltage (the Proven wind
turbine controller works like this) but the tristar does a better job
of looking after the batteries with PWM so I would prefer to use that.
The relay driver looks fun though. Could be handy for gen start.
Best
Hugh
>
>peltz power
>On Dec 23, 2006, at 8:35 AM, Hugh Piggott wrote:
>
>>
>>I normally recommend using a water heater on the tristar
>>controllers I install. It's well worth the hassle if there is a
>>significant amount of power being dumped. I use a relay (battery
>>or inverter powered) via the thermostat to transfer the current to
>>a space heater when the water is hot. Obviously the relay needs to
>>be able to handle the current, which tends to be high. Also you
>>will need a suitable wire run from the battery shed to the hot
>>water tank. A bit of power loss in this wire run is no big deal.
>>--
>>Hugh
>>
>>Scoraig Wind Electric
>>http://www.scoraigwind.co.uk/
>>
>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & how to change your email address:
>www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
--
Hugh
Scoraig Wind Electric
http://www.scoraigwind.co.uk/
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list